Differences

This shows you the differences between two versions of the page.

--- manual:user_guide:maps_tools:calibrator [2023/03/30 15:59] – mstupka
+++ manual:user_guide:maps_tools:calibrator [2026/06/16 15:17] (current) – [Save the calibration configuration for later use] mstupka
@@ Line 1: / Line 1: @@
-{{ :manual:user_guide:ic_on_board_calibration_alt.png?nolink|}}====== Image map calibration ======
+{{ :manual:user_guide:ic_on_board_calibration_alt.png?nolink|}}====== Image Map Calibration ======
 ----
 ===== About =====
-This feature enables calibrating of an image of a map and placing it over a background map. For example when you go to the ZOO or a park simply take a picture of its detailed plan displayed on a board at the entrance. After that, you can calibrate the photo according to your background map and use it for your further navigation.
+This feature enables the calibration of an image of a map and the placement of it over a background map. For example, when you go to the ZOO or a park, simply take a picture of its detailed plan displayed on a board at the entrance. After that, you can calibrate the photo according to your background map and use it for your further navigation.
 <wrap info>Available only with **[[https://www.locusmap.app/premium|Premium]]**</wrap>
 ===== 1. Get a map picture =====
   * open the function in <wrap box>Menu > All features > Map tools > Image map calibration</wrap>, a dialog appears
-  * tap **Take** to take a photo with your phone camera - the more quality camera, the better
+  * tap **Take** to take a photo with your phone camera - the higher quality camera, the better
-  * or **Select** to choose the photo from your device memory, from Dropbox etc.
+  * or **Select** to choose the photo from your device memory, from Dropbox, etc.
 ===== 2. Calibrate the map picture =====
-  * tap //Add// and choose a **distinct point** (a hill summit, crossroads etc.) on your picture\\ {{ :manual:user_guide:maps_tools:calibr2.png?nolink |}}
+  * tap //Add// and choose a **distinct point** (a hill summit, crossroads, etc.) on your picture\\ {{ :manual:user_guide:maps_tools:calibr2.jpg?nolink |}}
-  * tap {{:manual:user_guide:ic_map_alt.png?nolink&30|}} in //Map coordinates menu// and choose **the same point** on your background map\\ {{ :manual:user_guide:maps_tools:calibr3.png?nolink |}}
+  * tap {{:manual:user_guide:ic_map_alt.png?nolink&30|}} in //Map coordinates menu// and choose **the same point** on your background map\\ {{ :manual:user_guide:maps_tools:calibr3.jpg?nolink |}}
-  * repeat this procedure **4 times** - try to select points making a rectangle. You can edit their positions by tapping {{:manual:user_guide:ic_edit_alt.png?nolink&30|}} or remove them.\\ {{ :manual:user_guide:maps_tools:calibr.png?nolink |}}
+  * repeat this procedure **4 times** - try to select points making a rectangle:\\ {{ :manual:user_guide:maps_tools:calibr12.jpg?nolink |}}You can edit their positions by tapping {{:manual:user_guide:ic_edit_alt.png?nolink&30|}} or remove them.\\ {{ :manual:user_guide:maps_tools:calibr.jpg?nolink |}}
 ===== 3. Generate your calibrated map =====
-  * when you are ready with your four points the status line **turns green** and the //Create// button activates\\ {{ :manual:user_guide:maps_tools:calibr4.png?nolink |}}
+  * when you are ready with your four points, the status line **turns green** and the //Create// button activates\\ {{ :manual:user_guide:maps_tools:calibr4.jpg?nolink |}}
-  * calibration points overview appears - indicates their **deviation**.\\ {{ :manual:user_guide:maps_tools:calibr5.png?nolink |}}\\ When it is not too significant you can name the new map and proceed to its rendering
+  * calibration points overview appears - it indicates their **deviations**.\\ {{ :manual:user_guide:maps_tools:calibr5.jpg?nolink |}}\\ You can add the name to the new map and tap **CREATE** to render the map.
-<WRAP round tip >If you have chosen a big image it is highly recommended to check **Optimize map** to divide the map image into many small maps (tiles) bundled into one file.
+<WRAP round tip >If you have chosen a big image, it is highly recommended to check **Optimize map** to divide the map image into many small maps (tiles) bundled into one file.
 </WRAP>
 ==== Save the calibration configuration for later use ====
-If you have **more map images of the same size and scale** to calibrate you can use one configuration for calibrating them all:
+If you have **more map images of the same size and scale** to calibrate, you can use one configuration for calibrating them all:
   - calibrate the first image
-  - **save the calibration configuration**:\\ {{ :manual:user_guide:maps_tools:calibr11.png?nolink |}}
+  - **save the calibration configuration**:\\ {{ :manual:user_guide:maps_tools:calibr11.jpg?nolink |}}
   - open the next image
+  - tap **Load configuration**
   - calibrate
   - repeat ad hoc.
 ===== 4. Use the calibrated map =====
-Your calibrated map appears now as an **overlay** and can be managed in **[[manual:user_guide:items:management|Map Items]]** box or in the **[[manual:user_guide:mainscr_lpanel#active_items|Active items]]** of the **content panel**. There you can change the opacity of the calibrated map by selecting it and moving the opacity slider:\\ {{ :manual:user_guide:maps_tools:calibr9.png?nolink |}}
+Your calibrated map appears now as an **overlay** and can be managed in **[[manual:user_guide:items:management|Map Items]]** box or in the **[[manual:user_guide:mainscr_lpanel#active_items|Active items]]** of the **content panel**. There you can change the opacity of the calibrated map by selecting it and moving the opacity slider:\\ {{ :manual:user_guide:maps_tools:calibr9.jpg?nolink |}}
+<WRAP center round tip>
+If you want to use the calibrated map elsewhere, e.g. in Google Earth, they are stored as KMZ files in the **///Locus/MapItems/calibrated_maps//** directory.
+</WRAP>

knowledge base

User Tools

Site Tools

Differences