knowledge base

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Inaccurate or wrong GPS location and elevation ======

----
<WRAP center round important>
**Important!** 

Get Locus Map permission for **all-time access to location** and **exclude it from all means of battery optimization** so that the app can run and access location data in the background. Instructions on how to do it are summed up **[[manual:faq:gps_lost_fix_android6|here]]** or **[[https://dontkillmyapp.com/|here]]**.
</WRAP>

Locus Map processes location and elevation gain from the data it receives from **your phone GPS** and other location/orientation sensors. If the data is incorrect or contains deviations, the resulting location fix and elevation gain are incorrect. Locus Map, however, offers a few methods on how to limit these deviations.
===== Light deviations =====

**Open Locus Map settings > GPS&sensors and set the following**

  * Location filter > select **medium or heavier filter**
  * Google Services assisted location > **turn it ON** (or OFF, it depends on your device)
  * Altitude manager > settings tab > SRTM data - select **Optimize GPS values**
  * Altitude manager > settings tab > Pressure sensor > **turn ON** (if available)
  * Altitude manager > settings tab > Altitude filter - select **medium or heavier filter**

===== Stronger deviations =====
Sometimes it happens that the GPS chip is malfunctioning or terrain/weather conditions are so demanding that elevation data is incorrect even after applying the measures mentioned above. Then try the following:
   * Open Locus Map settings > GPS&sensors > Altitude manager > settings tab > SRTM data - select **Replace GPS values** - this option calculates elevation gain from **offline elevation data** without using GPS

===== Custom altitude threshold =====
Those who are still unsatisfied with the result can change the elevation gain calculation by applying a custom altitude threshold:
  * open **[[manual:advanced:customization:config#expert_settings|Expert settings]]** > Customize altitude threshold > enable it
  * open a track or route detail > select **Edit** from the bottom menu
  * change altitude threshold with the slider\\ {{ :manual:faq:threshold.jpg?nolink |}}
knowledge base

User Tools

Site Tools
