User Tools

Site Tools


manual:faq:wrong_gps_data

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
manual:faq:wrong_gps_data [2023/10/11 16:23] mstupkamanual:faq:wrong_gps_data [2023/10/11 16:25] (current) mstupka
Line 18: Line 18:
   * Altitude manager > settings tab > Pressure sensor > **turn ON** (if available)   * Altitude manager > settings tab > Pressure sensor > **turn ON** (if available)
   * Altitude manager > settings tab > Altitude filter - select **medium or heavier filter**   * Altitude manager > settings tab > Altitude filter - select **medium or heavier filter**
 +
 ===== Stronger deviations ===== ===== Stronger deviations =====
 Sometimes it happens that the GPS chip is malfunctioning or terrain/weather conditions are so demanding that elevation data is incorrect even after applying the measures mentioned above. Then try the following: Sometimes it happens that the GPS chip is malfunctioning or terrain/weather conditions are so demanding that elevation data is incorrect even after applying the measures mentioned above. Then try the following:
-   * **Open Locus Map settings > GPS&sensors > Altitude manager > settings tab > SRTM data - select **Replace GPS values** - this option calculates elevation gain from **offline elevation data** without using GPS+   * Open Locus Map settings > GPS&sensors > Altitude manager > settings tab > SRTM data - select **Replace GPS values** - this option calculates elevation gain from **offline elevation data** without using GPS 
 ===== Custom altitude threshold ===== ===== Custom altitude threshold =====
 Those who are still unsatisfied with the result can change the elevation gain calculation by applying a custom altitude threshold: Those who are still unsatisfied with the result can change the elevation gain calculation by applying a custom altitude threshold:
   * open **[[manual:advanced:customization:config#expert_settings|Expert settings]]** > Customize altitude threshold > enable it   * open **[[manual:advanced:customization:config#expert_settings|Expert settings]]** > Customize altitude threshold > enable it
-  * open a track or route detail > select **Edit* from the bottom menu+  * open a track or route detail > select **Edit** from the bottom menu
   * change altitude threshold with the slider\\ {{ :manual:faq:threshold.jpg?nolink |}}   * change altitude threshold with the slider\\ {{ :manual:faq:threshold.jpg?nolink |}}
manual/faq/wrong_gps_data.1697034193.txt.gz · Last modified: 2023/10/11 16:23 by mstupka