Differences

This shows you the differences between two versions of the page.

--- manual:advanced:customization:config [2025/10/16 16:14] – mstupka
+++ manual:advanced:customization:config [2026/05/22 16:17] (current) – mstupka
@@ Line 3: / Line 3: @@
 ----
 ===== Expert settings =====
-<WRAP center round info>
-This section is IN CONTINUOUS DEVELOPMENT</WRAP>
 Settings that are not essential for running the app and overall user experience. Some of these settings were removed from the general settings because of weak usage, some were found redundant, and some have a purpose only for advanced Locus Map users.
@@ Line 11: / Line 9: @@
   * tap **Expert settings**
   * Expert settings appear at the bottom of the Locus Map general settings
+----
 ==== UI/UX ====
@@ Line 27: / Line 27: @@
 === Display tips&tricks ===
 Displays information boxes in various parts of the app, highlighting key features and usage instructions.
+=== Separate GPS and Compass screens ===
+Normally, the GPS and Compass share the same double-tabbed screen. By turning this on, you assign an individual screen for each feature. Useful if you have a low-powered device.
+=== Compass in light color ===
+By default, the Compass screen is black. By turning this on, you change the color to shades of white.
+=== Close after adding a point ===
+Automatically closes the [[..:..:user_guide:points:quick_add|Quick add point]] dialog after a new point is added.
 ==== Maps ====
+=== Local map server ===
+The app can serve the map currently displayed on the main screen to nearby devices sharing the same network. The Locus Map web is the most obvious recipient.
+=== Show zoom range in map list ===
+Supported zoom levels are displayed for each map in the list of online maps.
 === Hold map center timeout ===
 Defines the period of time in seconds before your location is automatically centered on the map screen in case the **[[manual:user_guide:maps_mainscr_ctrl#controlling_the_map|Hold map center]]** is active.
@@ Line 53: / Line 62: @@
 === Map scale font size ===
 Here, you can define the font size for the map scale label
-=== Show date&time in toolbar ===
+=== Show date&time on the top ===
 When activated, the top information panel item "time&battery status" also shows time and date.
 ==== Map-screen content ====
@@ Line 70: / Line 79: @@
 === Heading line color/background ===
 Definition of the style of the [[manual:user_guide:maps_settings#heading_line|Heading line]]
-=== Time circles color, background, text size ===
+=== Time circles color, background, text size, value format ===
 Definition of the style of the [[manual:user_guide:maps_settings#time_circles|Time circles]]
 === Distance circles color, background, text size, color/background when no GPS ===
@@ Line 76: / Line 85: @@
 === Entries above/below auxiliary lines ===
 Select parameters displayed above and/or below various lines in app - route planner, two-finger measurement, etc. - distance, bearing, time of arrival, elevation, time to target, and ETA&time to target.
-=== Tile hunters grid ===
+=== Tile Hunter grid ===
 Activates the option to select a tile hunter's grid (StatsHunters) in the map content panel grid selection (referring to zoom 14).
 === Heading without GPS ===
@@ Line 100: / Line 109: @@
 === New point name time format ===
 Defines the format of the time used in a new point's name. Default is yyyy-MM-dd HH:mm:ss.
+=== Quick add point time format ===
+Date/time format for the {t} tag in the [[..:..:user_guide:points:quick_add|Quick add point]] feature (default: yyyy-MM-dd 'at' HH:mm).
 === Default icons ===
 You can set the default icon for a new [[..:..:user_guide:points:add:|point]], [[..:..:user_guide:tracks:recording#recording_is_on|waypoint]] (entered during track recording) and [[..:..:user_guide:tracks:planning#via_points|via-point]] (entered during route planning)
@@ Line 139: / Line 150: @@
 {{:manual:advanced:customization:cfg_exmpl_guideline2.png?nolink|}}
 guiding_path_symbol=-11|0|-14|-5|5|0|-14|5
-=== Line/text color ===
+=== Line/text background color ===
-FIXME to be added...
+Allows setting the background color for the guidance line and texts.
 ==== Route planner ====
 === Route planner - interpolation saving ===
@@ Line 151: / Line 162: @@
 Support for logging trackables offline. To log the trackable online, use the log manager in the geocaching tools.
 ==== Hardware controlling ====
-<WRAP center round todo 60%>
+=== Hardware buttons over 'screen lock' ===
-to be continued...
+When enabled, hardware buttons can control the app even when the screen is locked.
-</WRAP>
+=== Scroll to zoom ===
+When enabled, it is possible to zoom the map by a scrolling controller (e.g. mouse when running on a PC)
+In this section, also **KEY-CODEs** for various events can be configured: **Screen on/off, GPS on/off, Map centering on/off, Map rotation on/off, Map zoom in/out** and **Screen lock toggle**.
 ==== Tools ====
-=== Hardware buttons when 'screen lock' ===
+=== GPS auto-off ===
-When enabled, hardware buttons can control the app even when the screen is locked.
+A system for turning the GPS off automatically to save battery consumption, e.g., during long-distance hikes. \\ {{ :manual:advanced:customization:expert02.jpg?nolink |}}
-=== Scroll to zoom ===
+  * **GPS update interval**  - sets the time interval of GPS switching on and locating the device. Values of more than 60 seconds save battery life.
-When enabled, it is possible to zoom the map by scrolling controller (e.g. mouse when run on a PC)
+  * **Min accuracy**  - sets the minimum GPS locating accuracy to keep GPS on. When the accuracy is lower due to too few detectable satellites, the GPS turns off.
+  * **Max search time**  - sets the maximum time of GPS signal searching. If the GPS fix is not secured within this period, the GPS turns off.
+  * **Keep auto-off enabled** - keeps GPS auto-off enabled even if Locus Map is active and the screen is on.
+<WRAP center round important>
+This option is **not available/reliable on devices running OS Android 12+** due to the system restrictions of certain automatic actions running in the background.
+</WRAP>
+=== Notify of disabled GPS ===
+When turned on, the app notifies when the system's GPS is switched off.
+=== Enable online search (old) ===
+Adds the obsolete online search based on the Google Places service to the offer of search methods.
 === Record sensors data ===
-When enabled, all the phone sensors data are recorded in a file in Locus/data/sensors directory.
+When enabled, all the phone sensors' data are recorded in a file in the Locus/data/sensors directory.
-=== Enable TTS over BT SCO ===
+==== Units ====
-When enabled, TTS audio is played over a Bluetooth SCO module.
+=== Coordinates, high precision ===
+Adds two decimal places to the coordinate values. Useful when a sub-meter external GNSS unit is connected.
+=== Altitude, high precision ===
+Adds two decimal places to the altitude values. Useful when a sub-meter external GNSS unit is connected.
+=== Angle, high precision ===
+Adds two decimal places to the angle and gradient values.
 ==== Tweaks ====
-=== Smooth interface ===
+=== Hardware acceleration ===
-Enables animations and other tweaks for more comfortable experience. We recommend to use this only on fast devices.
+Turn on to accelerate rendering of points and tracks on the map.
-=== Allow login over Google Play Services ===
+=== Login over Google Play Services ===
-When switched off, only an email login to Locus Store or Live Tracking is possible. Recommended when MicroG service is used.
+When switched off, only an email login to Locus Store or Live Tracking is possible. Recommended when MicroG service is used. Deactivating results in logging you out of your Locus account.
+=== Set a custom camera app ===
-FIXME TO BE CONTINUED... FIXME
+Enables the use of any installed custom camera app for use within Locus Map. Just insert its package name.
+=== Set a translation app ===
-===== Configuration file =====
+Select from the system chooser or installed translation apps.
+==== Development ====
-  * Since version 2.3.2 Locus Map offers advanced configuration options through //config.cfg// file stored in **Locus Map root directory** in your phone **memory**
+These options are for development only and are considered risky for ordinary app usage.
+=== Log to file ===
-  * This file is automatically created on the Locus Map first start (if it does not exist from its previous installation). Data is loaded at start and stored back to the file in the end, so even if this file allows changing some settings that are also changeable in the application, the settings will not be lost.
+App records all its processes into logs in the Locus/logs directory.
+=== Draw map tile bounds ===
-<WRAP center round info>
+Displays map tile bounds, including related information above the map.
-As this method has become obsolete and is quite user-unfriendly, settings included in this configuration file are moved gradually to the **Expert settings** section mentioned above.
+=== WakeLock when GPS on ===
-</WRAP>
+Keeps partial wakelock enabled while using GPS.

knowledge base

User Tools

Site Tools

Differences