Differences

This shows you the differences between two versions of the page.

--- manual:advanced:customization:config [2026/05/26 16:16] – mstupka
+++ manual:advanced:customization:config [2026/09/01 15:25] (current) – [Units] mstupka
@@ Line 107: / Line 107: @@
 === Center on point ===
 By default, the points are centered when tapped, and their detail panel appears. Here you can switch the centering off.
+=== Hide point after move ===
+When you move a point from a folder to a different folder in your Library, the point will be hidden from the map.
 === Simplify visible points ===
 Here, you can define the map zoom level from which the point icons are simplified to a dot. The default is 10; 0 means that simplification is turned off.
 ==== Tracks & routes ====
-=== Fill color of ... chart ===
-Custom settings of track/route chart line colors - altitude, cadence, gradient, heart-rate, speed, sensor speed and temperature. The color is defined both for a **track/route [[..:..:user_guide:tracks:about#elevation_chart|detail]]** and for **[[..:..:user_guide:tools:dashboards|dashboards]]**.
 === Customize altitude threshold ===
 This allows modifying the altitude threshold of all tracks in case the phone's GPS shows deviations or the calculated elevation gain seems exaggerated. When the option is turned on, a new control appears in a track detail [[..:..:user_guide:tracks:about#editing_info|edit screen]].
@@ Line 120: / Line 120: @@
 === Track selection highlight ===
 When turned on, a track or route tapped on the map is highlighted with a changed color.
+=== Beep on recorded point ===
+When turned on, a short beep is played on each successfully recorded track point.
+=== Show area in track statistics ===
+Displays a box with the measured area covered by the track in the track stats.
 ==== Import & export ====
 === Width of exported photos ===
 Defines the width of photos attached to points, exported to KML. 60 px is the default.
+=== Compress single file export ===
+When you export multiple items in one file, it is also compressed into a ZIP archive.
+=== Auto-overwrite import folders ===
+Here, you can define pipe-separated folder names whose points are always overwritten when importing duplicates, e.g. favorites|geocaching.
 ==== Navigation/guidance ====
 === Auto GPS on navigation ===
 When navigation or guidance is started, the app turns GPS on, although it is turned off.
+=== Voice announcement times ===
+Here you can set the time in seconds when the navigation commands are announced before a turn. Enter pipe-separated values. The default is 15|35|300.
 === Guidance path symbol ===
 This parameter allows you to define the shape and size of the guiding line very precisely. Best to explain it on the default parameter.
@@ Line 153: / Line 164: @@
 === Offline logging of trackables ===
 Support for logging trackables offline. To log the trackable online, use the log manager in the geocaching tools.
-==== Hardware controlling ====
+=== Offlinizer max image size ===
+Here you can define the maximum size of a single image downloaded by the [[..:..:user_guide:geocaching:tools#geocaching_offlinizer|GC offlinizer]].
+=== Draw lines to geocache waypoints ===
+Draws thin lines between a geocache and its waypoints on the map.
+=== Waypoint line width ===
+Set the width of the cache - waypoint lines in dp  (1 dp is the default).
+=== Hide waypoints below zoom ===
+Define the zoom limit above which the GC waypoints are hidden. Zoom 12 is the default.
+=== Geocaching icon pack ===
+When a [[manual:advanced:customization:icons#geocaching_icons|custom GC icon pack]] is available, it displays here in the list.
+==== Hardware controls ====
 === Hardware buttons over 'screen lock' ===
 When enabled, hardware buttons can control the app even when the screen is locked.
@@ Line 159: / Line 180: @@
 When enabled, it is possible to zoom the map by a scrolling controller (e.g. mouse when running on a PC)
-In this section, also **KEY-CODEs** for various events can be configured: **Screen on/off, GPS on/off, Map centering on/off, Map rotation on/off, Map zoom in/out** and **Screen lock toggle**.
+In this section, the **keys** for various events can also be configured: **Screen on/off, GPS on/off, Map centering on/off, Map rotation on/off, Map zoom in/out** and **Screen lock toggle** - press a hardware button to map it for each action comfortably.
+=== Compass orientation offset ===
+Define a degree offset to apply to the raw hardware compass reading to correct possible misalignment.
+=== Compass sensor filter strength ===
+Adjust the smoothing factr for the hardware compass sensor (1 = no smoothing, 50 = max smoothing, 10 = default)
 ==== Tools ====
 === GPS auto-off ===
-A system for turning the GPS off automatically to save battery consumption, e.g., during long-distance hikes. \\ {{ :manual:advanced:customization:expert02.jpg?nolink |}}
+A system for turning the GPS off automatically to save battery consumption, e.g., during long-distance hikes.\\ {{ :manual:advanced:customization:expert02.jpg?nolink |}}
   * **GPS update interval**  - sets the time interval of GPS switching on and locating the device. Values of more than 60 seconds save battery life.
   * **Min accuracy**  - sets the minimum GPS locating accuracy to keep GPS on. When the accuracy is lower due to too few detectable satellites, the GPS turns off.
@@ Line 170: / Line 196: @@
 This option is **not available/reliable on devices running OS Android 12+** due to the system restrictions of certain automatic actions running in the background.
 </WRAP>
 === Notify of disabled GPS ===
 When turned on, the app notifies when the system's GPS is switched off.
+=== Keep GPS alive by toast ===
+A "hack" attempting to keep GPS and the app running in the background despite the system battery optimization. Only partly functional.
+=== Separate NMEA records ===
+When turned on, the app saves each day's NMEA data as a separate incremented file instead of one continuous file.
+=== Cursor speed without GPS ===
+Useful for the app testing - simulated speed in m/s is applied to the map cursor when GPS is off.  0 = disabled.
+=== Sound notification max length ===
+Here you can set a maximum duration for sound and song notifications (default: 5s. 0s = unlimited)
+=== Compass respects sensor settings ===
+When enabled, compass orientation is controlled by Settings > Compass. When disabled, the internal device orientation sensor is always used.
+=== Keep screen on after gesture wake ===
+When the screen is turned on by a proximity gesture, disable the automatic turn off if the timer is idle.
 === Enable online search (old) ===
-Adds the obsolete online search based on the Google Places service to the offer of search methods.
+Adds the obsolete online search based on Google Places and other 3-rd party services to the offer of search methods.
-=== Record sensors data ===
+=== Record sensor data ===
 When enabled, all the phone sensors' data are recorded in a file in the Locus/data/sensors directory.
 ==== Units ====
 === Coordinates, high precision ===
 Adds two decimal places to the coordinate values. Useful when a sub-meter external GNSS unit is connected.
-=== Altitude, high precision ===
+=== High precision mode ===
-Adds two decimal places to the altitude values. Useful when a sub-meter external GNSS unit is connected.
+Adds two decimal places to the altitude, angle, distance and gradient values.
-=== Angle, high precision ===
+==== Bugfixes ====
-Adds two decimal places to the angle and gradient values.
+=== Limit geodetic line detail ===
+Reduces computation o very long geodetic lines to prevent rare crashes on some devices.
 ==== Tweaks ====
 === Hardware acceleration ===
@@ Line 189: / Line 229: @@
 When switched off, only an email login to Locus Store or Live Tracking is possible. Recommended when MicroG service is used. Deactivating results in logging you out of your Locus account.
 === Set a custom camera app ===
-Enables the use of any installed custom camera app for use within Locus Map. Just insert its package name.
+Enables the use of any installed custom camera app for use within Locus Map. Just insert its package name. You can find it in the URL of the Google Play page of the app:\\ {{:manual:advanced:customization:expert03.jpg?nolink |}}\\
 === Set a translation app ===
 Select from the system chooser or installed translation apps.
-==== Development ====
-These options are for development only and are considered risky for ordinary app usage.
-=== Log to file ===
-App records all its processes into logs in the Locus/logs directory.
-=== Draw map tile bounds ===
-Displays map tile bounds, including related information above the map.
-=== WakeLock when GPS on ===
-Keeps partial wakelock enabled while using GPS.

knowledge base

User Tools

Site Tools

Differences