Differences

This shows you the differences between two versions of the page.

--- manual:faq:gps_lost_fix_android6 [2018/06/22 09:48] – [Huawei/Honor] mstupka
+++ manual:faq:gps_lost_fix_android6 [2025/10/17 11:48] (current) – mstupka
@@ Line 1: / Line 1: @@
-====== Why Locus loses fixed GPS location or is killed by OS in standby mode ======
+====== Why Locus Map loses fixed GPS location or is killed by OS in standby mode ======
 ----
-More and more users have been reporting issues with **losing GPS signal** during track recording when their device goes stand by even in case Locus is set NOT to switch GPS off in stand-by mode (when the display goes off). Some devices even **kill Locus completely**. All of these reports regard devices running on Android 5+.
+Increasingly, users have reported issues with losing their GPS signal during track recording when their device enters standby, resulting in direct lines instead of accurately recorded tracks. **What to do to avoid it?**
-===== System battery optimization mode =====
+===== 1. Allow Locus Map to access GPS any time =====
-The most probable reason of this is some kind of **battery saving mode** or other **performance optimizing setting** in your device. The mode can be named differently depending on the device manufacturer. The battery saving modes prevent the device from connecting to networks and switch off your device sensors including GPS unit - **this setting overrides Locus settings**.
+The operating system must be set for Locus Map **NOT to switch GPS off in standby mode** (when the display goes off) - always select the **All the time** permission for Locus Map.
-If you experience any loss of GPS signal in stand-by mode, please check your device battery saving or optimization settings. Either **switch the saving mode completely** or **make an exclusion for Locus** if it is possible.
+==== Android 11 and newer ====
+The "all the time" permission is **not included in the system app permissions**. You can select only "while using this app" or "ask every time":\\ {{ :manual:faq:loc_permission01.png?nolink |}}\\ When you **launch Locus Map** and start some feature that runs in the background (voice navigation, track recording, live tracking...), Locus Map displays a compulsory warning:\\ {{ :manual:faq:loc_permission02.png?nolink |}}. Then you are prompted to **allow all-time access to the location** in the system settings:\\ {{ :manual:faq:loc_permission03.png?nolink |}}\\ {{ :manual:faq:loc_permission04.png?nolink |}}
+<WRAP center round important>
+This setting, however, is not permanent. **After not using the app for some time (e.g., three months), the "all-time" access permission is taken away** and you have to go through this procedure again.
+</WRAP>
+==== Android 10 ====
+This OS version divides permission to access GPS location into three modes:
+  * **no access** - the app is unable to get an accurate location ever
+  * **only when the app is used** - Locus Map can get GPS location only when the display is on and Locus is "used", i.e., manipulated directly on the screen. When the display goes off, Locus loses the GPS location and can't record tracks, navigate, share location in real-time over Live tracking, etc.
+  * **all the time** - the only mode in which Locus Map is permitted to run correctly in the background so please **USE THIS MODE!** It doesn't mean Locus Map is connected to GPS all the time, though - only when it needs it so don't worry about the battery consumption.
+===== 2. Exclude Locus Map from battery optimization =====
+**Battery saving modes** or other **performance-optimizing settings** in your device kill apps they consider unused or redundant, no matter whether the app is running in the background on the user's request. The mode can be named differently depending on the device manufacturer. There are two ways to prevent this - either **switch the saving mode completely OFF** or **make an exclusion for Locus Map** if it is possible.
+Here are a few device-specific instructions based on findings of **[[https://www.dontkillmyapp.com|Dontkillmyapp.com]]**:
-Here are a few device specific instructions:
-==== HTC ====
-//Standard/Extreme Power Saving Mode// - switch it OFF
 ==== Samsung ====
-  * **Android 6+** - settings > battery > //Power saving mode OFF// + battery use > "next" (three dots)  button in topbar > battery use optimization > click on "Apps are not optimized" and select "All apps" and here finally find Locus Map and switch the optimization OFF for it.
+Please visit **https://dontkillmyapp.com/samsung >>**
-  * **Android 7** - Apps > ...(menu) Special Access > Optimize battery usage -> (drop down) All apps -> look for Locus and switch off switcher near it.
 ==== Huawei/Honor ====
-There are several tips. Check out which one fits for your device:
+Please visit **[[https://support.strava.com/hc/en-us/articles/216942547-How-to-fix-GPS-recording-issues-on-Huawei-phones|Strava support site >>]]** or **https://dontkillmyapp.com/huawei >>**
-  * Settings > Apps > Advanced > Ignore optimizations > All apps > disable optimizations for Locus Map
-  * Settings > Apps > Settings button > Special access > Ignore optimizations > Locus Map Free/Pro > Allow
-  * Settings > Battery > 'disable' Power saving mode, 'disable' Ultra power saving
-  * Settings > Battery > Settings button > 'disable' close excessively power-intensive apps
-  * Settings > Battery > Close apps after screen lock > 'disable' for Locus Map Free/Pro
-Tips also on [[https://support.strava.com/hc/en-us/articles/216942547-How-to-fix-GPS-recording-issues-on-Huawei-phones|Strava support site >>]]
-=== Huawei/Honor Android 8+ ===
-  * phone settings > apps > Settings button > Special access > Ignore optimizations > Locus Map Free/Pro > Allow
-  * phone settings > battery > 'disable' Power saving mode, 'disable' Ultra power saving
-  * phone settings > battery > App launch > 'disable' automatic and keep all three 'manual' settings enabled
-In Locus Map, better results are with disabled Settings > GPS > Google Services assisted location.
 ==== Sony ====
-Do not use //STAMINA mode//.
+Please visit **https://dontkillmyapp.com/sony >>**
 ==== Nexus ====
-Switch //Battery saver, battery optimization// off or exclude Locus from its activity.
+Please visit **https://dontkillmyapp.com/google >>**
 ==== Xiaomi ====
-    * **Android older than 6.0** - turn //Standard/Advanced Power Saving Mode// OFF
+Please visit **https://dontkillmyapp.com/xiaomi >>**
-    * **Android 6+ (MIUI 8+)**
+==== HTC ====
-      * Security > Battery > Battery saver > OFF or Settings > Battery & performance > Manage apps battery usage > Power saving modes > OFF
-      * Security > Battery > App Battery Saver > select Locus Map > No restrictions
+Please visit **https://dontkillmyapp.com/htc >>**
-      * Security > Manage apps > Permissions > Autostart > Locus Map ON
-      * Security > Battery > Settings icon (top right corner of the screen) > Clear cache when device is locked > Never
-      * lock Locus Map in RAM when you want to use it in background: start Locus Map > minimize it > open RAM manager > drag Locus icon downwards and tap the lock icon
-      * //Optional if nothing above helps//: Settings > Additional settings > Developer options (this option is activated after several taps on phone info > MIUI version) > turn OFF RAM optimization
-<WRAP center round tip>
+<WRAP center round info>
-Some devices (e.g. Motorola) enable **excluding location service** from battery optimization.
+Some devices (e.g. Motorola) enable **excluding location service** from battery optimization. For more information about battery optimization of other mobile phone vendors, please see **https://dontkillmyapp.com/**.
 </WRAP>
-===== Battery optimization apps =====
-There are also third-party apps that can maintain your battery optimization and may kill Locus or GPS unit.
-==== Greenify ====
-Greenify has some special settings (labeled experimental), that enhance new Android 6 power saving strategies. These power saving strategies are labeled "shallow hibernation" and "aggressive doze". The "aggressive doze" mode contains also a white list of apps that are excluded from the mode and Locus is likely to be put here for the above mentioned reasons. Unfortunately, this white listing does not work. After 5 minutes after your device enters doze mode Locus track recording is killed. Therefore, we recommend not to use this aggressive mode or the app as a whole.
-===== Universal solution? =====
-==== Memory Locker ====
-Recently we discovered an application that can lock Locus (and other apps of your choice) in your device RAM. It's called **Memory Locker** and is available at **[[https://play.google.com/store/apps/details?id=com.smartprojects.MemoryLocker|Google Play Store]]**. We have tested only a few devices with this app and it looks promising. However, as this is a third party app, we have no responsibility for nor influence on the app performance.
+===== 3. Turn OFF Google Services assisted location =====
-==== GPS Locker ====
+On some devices, this option causes the GPS for Locus Map running in the background to be killed. So, if you experience such behavior despite you performed the actions in steps 1 and 2, please do the following:
-This app is able to lock system GPS ON so that the operation system can not kill it - we recommend in cases Locus loses GPS signal in standby mode and none of previously mentioned methods helped. The app is available at **[[https://play.google.com/store/apps/details?id=com.silentlexx.gpslock|Google Play Store >>]]**
+  * go to Locus Map settings > Gps&Sensors
+  * find Google services-assisted location and **TURN IT OFF**
-----
-Is this article useful for you? Please rate it:
-{(rater>id=1|name=faq_gps_lost_fix_android6|type=rate|headline=off)}

knowledge base

User Tools

Site Tools

Differences