Tracks are recorded in profiles. Each profile is defined by a set of parameters reflecting various aspects of the recording. Settings of these parameters can be accessed from:

• Locus settings > Track recording > particular recording profile
  
• Track recording panel > Track recording settings > particular recording profile
  

In these settings, you can edit an already created profile. If you want to add a new one Available only with Premium), go up one level in the settings hierarchy (settings > track recording).

• Name - insert name of the profile
• Preferred folder - select which folder will be used for storing recorded tracks from this profile. Default is Last used. If you need a new folder, please go to the track manager first.
• Auto-save after stop - check to save recorded tracks automatically into the preferred folder immediately after the recording is stopped. Option is active only when other than Last used folder is selected.
• Remove this profile - deletes current profile, available only with Premium

• Distance interval - sets distance between recorded trackpoints. The slower movement, the shorter the distance should be.
• Time interval - sets time period between recording two trackpoints. The slower movement, the longer the period should be.
• Trackpoint recording conditions - defines method of trackpoint recording based on distance and time intervals:
  • Distance AND time - both intervals at once trigger trackpoint recording - smoother line but less accurate
  • Distance OR time - one of the intervals triggers trackpoint recording - very accurate but a lot of trackpoints recorded
• Required GPS accuracy - sets maximum acceptable range of GPS accuracy for recording trackpoints
• Auto-pause - experimental option - automatically pauses track recording based on all available movement sensors of your phone. Unfortunately, not reliable on all devices.
• Record only when moving - track recording is running only provided Locus Map detects movement of the device. If not, the recording is paused.
  

  Sometimes, location indicator is moving on map even when speed is 0 m/s. That is caused by post-processing of raw GPS data in the device and insufficient amount of data. By enabling this feature, Locus Map stores only correct trackpoints.

• Record when GPS is off - track recording proceeds even if the GPS signal is out, e.g. in buildings. Location is acquired by wifi and mobile networks and can be approximate only.
  

  “Accuracy” of such a recording can oscillate kilometers from your real location or such recording can be stopped due to low value in the Required accuracy parameter.

• Track recording line style - launches a dialog with line style settings - color, mode, pattern, width etc.
• Display only part of track on map - limits number of visible trackpoints of actually recorded track. Recommended for long or frequent routes. Too long recording (too many trackpoints) may slow down the display of maps.
• Displayed track part length - defines number of visible recorded trackpoints on map in order to secure smooth running of the app

• Connected hardware auto-start - here you can select bluetooth or ANT+ sensors connected to the phone that should be started simultaneously with the track recording. Available only with Premium
• Audio coach auto start - defines a audio coach scheme to be started simultaneously with the track recording. Available only with Premium
• Automatic export - sets automatic export of recorded track to a file or web service. The setting dialog is the same as in the Track export except of a new button - Set - that confirms the export selection
• Live tracking auto-start - defines a Live tracking event to be launched simultaneously with the track recording. Available only with Premium